Indications for use : - These endodontic instruments XP Endo rise shaper are intended for use in medical or hospital facilities, by qualified health professionals. - XP Endo rise shaper instruments are designed for shaping of root canals. - Speed : 1000 rpm. - Torque : 1 Ncm. - Create straight-line coronal and radicular access. - Use an ISO 010 hand file to explore the canal. - Determine the working length using a radiograph. In addition, electronical working length determination can be achieved. - Use the mechanized XP-Endo rise glider instrument to perform glide path until the working length is reached. - Start the shaping procedure, applying your usual irrigation protocol. - Insert the tip of the XP Endo Rise Shaper into the canal until resistance (Fig. 1), retract (tip loose) and start the motor. - Use long gentle strokes to progress down to working length (WL) (Fig. 2). - If WL is not reached in 8 strokes, stop, irrigate, recapitulate, and proceed again. - Do not use pecking motion! Never force the instrument and always keep it spinning and moving while in the canal. - Once working length is reached, remove the instrument to avoid supplementary enlargement of the canal. - Irrigate the canal in order to eliminate suspended debris. - Choose a gutta percha point that is tight and seats at the correct WL. If 30/.04 is desired and does not fit, work the XP-Endo rise shaper for an additional 1-3 strokes. - Apply your usual disinfection protocol. - Once all the canals have been shaped, proceed with the deep cleaning (or disinfection) of the canals. - For an optimal result, the use of the finisher is recommended. **For further product information, please contact Chat Support**